Honor Magic Teardown

0

Honor Magic comes with a 5.09-inch touchscreen display with a resolution of 1440 pixels by 2560 pixels at a PPI of 577 pixels per inch.

It is powered by 1.8GHz octa-core Kirin 950 processor, and it comes with 4GB of RAM. The phone packs 64GB of internal storage cannot be expanded. As far as the cameras are concerned, the phone packs a 12-megapixel primary camera on the rear and an 8-megapixel front shooter for selfies.

The Honor Magic runs Android 6.0 and is powered by a 2900mAh non-removable battery. It measures 146.10 x 69.90 x 7.80 (height x width x thickness).

For the freshest produce, find us on Facebook for the latest teardown news.

The first step is powered off the phone. And then remove the SIM card tray.

Heat up the back cover with this equipment for about two minutes.

Pry up the display a little bit with a sucker and insert a pick.

Slide the pick along the edge until you can remove the back cover.

In addition to the camera, flash, laser focus on the rear shell, there is no spare parts design.

Lift up the graphite stickers and try to remove it.

As the graphite sticker and the above NFC coil connected, it can not be directly removed.
Remove all screws securing the NFC coil. You can remove the graphite sticker and NFC coil.

Disconnect all BTB from the motherboard.

Disconnect the coaxial cable from the motherboard.

All the screws on the motherboard have been removed, but still can not remove the motherboard. You need to remove the above two plastic fixed plate.

Now lift up and remove the motherboard.

Remove the rear dual camera from the motherboard.

Remove two front-facing cameras.

With the metal shield removed, you can see the main chips on the motherboard.

Remove two screws securing the loudspeaker.
Pry up and remove it.

Disconnect two BTB from the sub-board.

Lift up the headphone jack cable and remove it.

Disconnect the main FPC, coaxial cable and fingerprint BTB.

Remove all screws securing the sub-board.

Lift up and remove the sub-board.

Fingerprint recognition sensor

Pull out the glue and remove the battery.

Huawei Honor Magic comes with a 3.82V, 2900mAh Li-polymer battery.

Source

LEAVE A REPLY

Please enter your comment!
Please enter your name here

66  −  64  =