laptop parts
Register | Log In Your cart is empty
Home ::  Laptop LCD Cable ::  Acer ::  DDZRQBLC010
LCD Cable for Acer DDZRQBLC010

Click for larger image and additional views.
Product Description
Note: Make sure the LCD cable has same part number, photo as your original LCD cable!
  • SKU: LMCAC10004
  • Condition: Brand new info
  • Warranty: 12 Months info
  • Availability: In Stock, ready to ship in 24 hours

This is a brand new video cable for Acer DDZRQBLC010 laptop. It is sold exactly as shown on the website. Be sure to remove your original LCD cable from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to remove or replace LCD cable on Acer DDZRQBLC010

1. Make sure the Acer DDZRQBLC010 laptop is shut down. Unlock and remove the battery.
2. Remove two screws securing the keyboard from the bottom cover.
3. Flip the laptop over and open the display.
4. Pry the keyboard with a flat-head screwdriver. Insert the flat-head screwdriver between the keyboard and the top cover.
5. Carefully push the keyboard and lift it up.
6. There are a few retainers securing the keyboard, you'll have to release them with the flat-head screwdriver.
7. Lift up the upper side of the keyboard and move it towards the display assembly.
8. Slide the brown tap about 2-3 millimeters to the display assembly. Pull the cable from the connector.
9. Under the keyboard, remove one screw securing the optical drive. Pull the optical drive and remove it.
10. Remove one screw securing the memory cover. Lift up and remove the cover.
11. Remove all screws from the bottom cover. Remove four screws securing the top cover assembly and disconnect the power button cable and touchpad cable.
12. Start separating the top cover assembly from the rest of the Acer DDZRQBLC010 laptop.
13. With the top cover was removed, disconnect the LCD cable from the motherboard.
14. Using a flat-head screwdriver remove the screw cover located in the lower left and right corner of the display bezel. Remove two screws under these screw covers.
15. Separating the bezel from the display back cover on the top side of the display. Insert the guitar pick between the display bezel and back cover and slowly move it along the side.
16. Insert your fingers under the bezel and wiggle it to release hidden latches.
17. Now move to the lower side of the display assembly. Lift up both hinge covers in the lower left and right corner of the display bezel. Remove the display bezel from the display assembly.
18. Remove four screws securing the screen to the display back cover.
19. Separate the LCD screen from the display back cover and place it the front side down on the palm rest assembly of the Acer DDZRQBLC010 laptop.
20. Carefully unglue the sticky tape securing the LCD cable. Unplug the LCD cable from the screen.
Write Review

Ask a question

Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
Copyright © 2016 All rights reserved.