laptop parts
Register | Log In Your cart is empty
Home ::  Laptop Cooling Fan ::  HP ::  15-f003dx
Cooling Fan for HP 15-f003dx

Click for larger image and additional views.
Product Description
  • SKU: LMFHP10003
  • Input: DC5V info
  • Output: N/A info
  • Condition: Original, Brand New info
  • Warranty: 12 Months info
  • Availability: In Stock, ready to ship

This is a brand new CPU Fan for HP 15-f003dx laptop, it is sold exactly as shown and does not include any additional parts or accessories. Be sure to remove your existing fan from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to remove or replace cooling fan on HP 15-f003dx

1. Shut down the HP 15-f003dx. Unlock and remove the battery.
2. Remove two Phillips PM2.5*5.0 screws that secure the keyboard to the computer from the bottom case.
3. Turn over the laptop and open the display.
4. Pry up the keyboard with a thin card, and then insert your fingers under the keyboard.
5. Turn the keyboard upside down and place it on the palm rest.
6. Unlock the keyboard cable connector and pull out the keyboard cable.
7. Remove the rear covers by prying off the two rubber feet, removing the two screws that secure the rear covers to the HP 15-f003dx, and then remove the rear covers.
8. Remove the two screws from the optical drive bay.
9. Remove the seven screws that secure the top cover to the computer.
10. Turn over the laptop and open the display. Disconnect the power button board cable and the touchpad cable and remove the four screws that secure the top cover to the HP 15-f003dx.
11. Separate the top cover with a thin card until it disengage from the base.
12. Disconnect the fan cable from the motherboard.
13. Remove three screws that secure the fan. Remove the fan from the laptop.
Write Review

Ask a question

Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
Copyright © 2016 All rights reserved.