laptop parts
Register | Log In Your cart is empty
Currencies:
 
Home ::  Laptop LCD Cable ::  HP ::  Envy 15t-k200 CTO
LCD Cable for HP Envy 15t-k200 CTO

Click for larger image and additional views.
Product Description
Note: Make sure the LCD cable has same part number, photo as your original LCD cable!
  • SKU: LMCHP10089
  • Condition: Brand new info
  • Warranty: 12 Months info
  • Availability: In Stock, ready to ship in 24 hours

This is a brand new video cable for HP Envy 15t-k200 CTO laptop. It is sold exactly as shown on the website. Be sure to remove your original LCD cable from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to remove or replace LCD cable on HP Envy 15t-k200 CTO

1. Shut down your HP Envy 15t-k200 CTO. Slide the battery lock latch and then slide the battery release latch to remove the battery.
2. Remove one screw securing the optical drive. Pull it out of the laptop.
3. Turn the laptop face down, and remove the rubber feet and two screws under the rubber feet, and then lift up and remove the end caps.
4. Remove eleven screws from the bottom cover.
5. Remove eight screws around the battery bay, two screws in the optical drive bay and one screw near the display hinge.
6. Turn the HP Envy 15t-k200 CTO right side up and separate the top cover with a thin card or guitar pick.
7. Sliding the guitar pick along the edges until the top cover fully released from the laptop.
8. Lift up the top cover. Be careful, there are four cables still connecting to the top cover.
9. Disconnect the power button cable, keyboard cable, touchPad cable, backlit cable from the motherboard.
10. Now you can remove the top cover assembly completely, and then you can replace the keyboard for your HP Envy 15t-k200 CTO.
11. Open the display back cover, swivel the LCD hinges on both sides and then tilt up the LCD hinge to release it.
12. Loosen the edges of the back cover from all four sides of the display bezel.
13. Disconnect webcam cable from the webcam module.
14. Remove six screws securing the screen to the display assembly.
15. Remove the sticky tape securing the cable and unplug the LCD cable from the display assembly.
Reviews
Write Review
Question
    • Q
    • Will this part work for the Full HD and touchscreen model?

      asked by Nathan Albu on September 27, 2018

    • A
    • Yes, it is compatible with FHD touchscreen.


Ask a question


Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
payment
Copyright © 2016 Laptopmain.com. All rights reserved.