laptop parts
Register | Log In Your cart is empty
Home ::  Laptop Cooling Fan ::  HP ::  Envy Touchsmart 14-k110nr
Cooling Fan for HP Envy Touchsmart 14-k110nr

Click for larger image and additional views.
Product Description
  • SKU: LMFHP10096
  • Input: DC5V info
  • Output: N/A info
  • Condition: Original, Brand New info
  • Warranty: 12 Months info
  • Availability: In Stock, ready to ship

This is a brand new CPU Fan for HP Envy Touchsmart 14-k110nr laptop, it is sold exactly as shown and does not include any additional parts or accessories. Be sure to remove your existing fan from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to remove and replace cooling fan on HP Envy Touchsmart 14-k110nr

1. Make sure the HP Envy Touchsmart 14-k110nr is turned off. Unlock and remove the battery.
2. Loosen one screw that securing the service cover to the computer. Lift up and remove the service cover.
3. Separate the clips and remove the RAM modules.
4. Disconnect the antenna cables and remove one screw. Take the wireless card away from its slot.
5. Remove two Phillips M2.5*6.5 screws that secure the keyboard to the HP Envy Touchsmart 14-k110nr. Insert a small screwdriver into the screw hole, and then press on the back of the keyboard until the keyboard disengages from the laptop.
6. While pushing on the back, you will see the front side separated from the top cover a little bit. Insert your fingers under the keyboard.
7. Turn the keyboard upside down and place it on the palm rest. Lift the connector tab and disconnect the keyboard cable from the motherboard.
8. Remove the Phillips M2.5*6.5 screw that secures the optical drive to the computer. Pull it to the left and remove it from the laptop.
9. Remove the five Phillips M2.5*3.0 screws that secure the top cover to the base. Disconnect the power button cable and the touchPad cable from the motherboard.
10. Remove the eight Phillips M2.5*6.5 screws from the bottom case.
11. Start separating the top cover from the bottom case using a guitar pick or thin card. Insert it under the top cover and move slowly along the side to unlock hidden latches.
12. With the top cover was removed. Disconnect the USB cable from the motherboard.
13. Now lift up the hard drive module and remove it.
14. Disconnect the LCD cable and speaker cable from the motherboard.
15. Remove the screw that secures the power connector bracket and remove the power connector bracket.
16. Remove two screws securing the motherboard. Lift up and remove it from the HP Envy Touchsmart 14-k110nr.
17. Disconnect the fan cable from the motherboard and remove two screws. You can remove the fan from the motherboard.
Write Review

Ask a question

Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
Copyright © 2016 All rights reserved.