laptop parts
Register | Log In Your cart is empty
Home ::  Laptop LCD Cable ::  HP ::  Pavilion 15-e033ca
LCD Cable for HP Pavilion 15-e033ca

Click for larger image and additional views.
Product Description
Note: Make sure the LCD cable has same part number, photo as your original LCD cable!
  • SKU: LMCHP10017
  • Condition: Brand new info
  • Warranty: 12 Months info
  • Availability: In Stock, ready to ship in 24 hours

This is a brand new video cable for HP Pavilion 15-e033ca laptop. It is sold exactly as shown on the website. Be sure to remove your original LCD cable from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to replace or remove LCD cable on HP Pavilion 15-e033ca

1. Before you start, make sure the HP Pavilion 15-e033ca is turned off. Unlock and remove the battery.
2. Loosen one screw that secures the service cover to the laptop.
3. Slide down the service cover until it disengages from the HP Pavilion 15-e033ca. Remove the service cover.
4. Disconnect two antenna cables and remove one screw, and then take it out of its slot.
5. Remove the two screws that secure the hard drive to the laptop and disconnect the hard drive cable from the motherboard.
6. Lift up on the black tab to remove the hard drive from the hard drive bay.
7. Remove two screws that secure the keyboard to the laptop.
8. Insert a thin tool into the keyboard screw hole, and then press on the back of the keyboard until the keyboard separated from the top cover a little bit.
9. Insert your fingers under the keyboard. Turn the keyboard upside down and place it on the palm rest.
10. Release the keyboard connector and then disconnect the keyboard cable from the motherboard.
11. Remove ten screws that secure the top cover from the bottom case.
12. Remove two screws in the battery bay, one screw in the optical drive and two screws in the hard drive bay that secure the top cover to the laptop.
13. Turn over the HP Pavilion 15-e033ca and open the display.
14. Disconnect the power button board cable and touchpad cable from the motherboard.
15. Remove five screws that secure the top cover to the computer.
16. Separate the top cover with the thin card until it is released from the laptop base.
17. Remove the top cover assembly.
18. Disconnect the LCD cable from the motherboard.
19. Remove two screw covers and four screws that secure the display bezel to the display assembly.
20. Insert your fingers under the bezel and start separating it from the display assembly.
21. Remove the bezel on the upper side of the display assembly. After that, move to the lower part.
22. Remove the bezel from the display assembly.
23. Disconnect webcam cable from the webcam module.
24. Remove the six screws that secure the screen to the display back cover.
25. Now you can separate the screen from the display back cover and place it on the keyboard assembly of the HP Pavilion 15-e033ca.
26. Release the adhesive strip that secures the LCD cable to the screen, and then disconnect the LCD cable.
27. Remove the four screws that secure the LCD hinges to the screen.
Write Review

Ask a question

Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
Copyright © 2016 All rights reserved.