laptop parts
Register | Log In Your cart is empty
Home ::  Laptop Cooling Fan ::  HP ::  Pavilion 15-n257nr
Cooling Fan for HP Pavilion 15-n257nr

Click for larger image and additional views.
Product Description
  • SKU: LMFHP10027
    • Input: DC5V
    • Output: N/A
    • Condition: Brand new info
    • Warranty: 12 Months info
    • Availability: In Stock, ready to ship in 24 hours

This is a brand new CPU Fan for HP Pavilion 15-n257nr laptop, it is sold exactly as shown and does not include any additional parts or accessories. Be sure to remove your existing fan from your laptop and confirm it is as same as ours.

Related Laptops
Install Guide

How to replace or remove cooling fan on HP Pavilion 15-n257nr

1. Turn off the laptop. Unplug the AC adapter from the laptop.
2. Unlock and remove the battery.
3. Loosen two screws securing the service cover. Slide the service door and remove it.
4. Under the service cover, you can access RAM and wireless card module.
5. Disconnect two antenna cables and take it out of the HP Pavilion 15-n257nr.
6. Remove the screw that secures the optical drive to the computer. Pull out the optical drive.
7. Remove the screw that secures the keyboard to the computer. Push on the back side of the keyboard with a small screwdriver through the screw hole.
8. While pushing on the back, you will see the front side separated from the top cover a little bit. Insert your fingers under the keyboard. Turn the keyboard upside down and place it on the palm rest.
9. Now unlock and pull out the keyboard cable. You can remove the keyboard completely.
10. Remove the seven screws that secure the top cover assembly to the base.
11. Disconnect the power button cable, touchpad cable and optical drive cable.
12. Remove eleven screws from the bottom of the HP Pavilion 15-n257nr. Remove three screws from the optical drive bay and three screws from under the service door.
13. Turn the computer over and open the display.
14. Start separating the top cover from the right upper corner, and then move to other three sides along the edges.
15. Lift up and remove the top cover assembly.
16. Disconnect the USB board cable and remove the screw securing the board. Lift up and remove the USB board.
17. Lift up the hard drive and disconnect it from the SATA cable.
18. Remove all screws securing the motherboard and disconnect all cables connecting to the motherboard.
19. Lift up and remove the motherboard from the HP Pavilion 15-n257nr.
20. On the other side of the motherboard. Disconnect the fan cable and remove two screws that secure the fan to the motherboard. Now you can remove the cooling fan.
Write Review

Ask a question

Shipping Money Back Warranty
Enter your email address to subscribe to our Newsletter.
Copyright © 2016 All rights reserved.