This is a brand new CPU Fan for HP Pavilion x360 13-u063na laptop, it is sold exactly as shown and does not include any additional parts or accessories. Be sure to remove your existing fan from your laptop and confirm it is as same as ours.
How to remove or replace cooling fan on HP Pavilion x360 13-u063na
1. Shut down the HP Pavilion x360 13-u063na. Disconnect the power adapter and external device from the computer. 2. Slide the battery lock latch to unlock the battery, and then slide the battery release latch to release the battery. 3. Remove the Phillips screw that secures the optical drive to the HP Pavilion x360 13-u063na. 4. Remove the optical drive by sliding it out of the optical drive bay. 5. Remove the two rubber bumpers from rear of the bottom of the computer. Remove the 11 Phillips screws that secure the bottom cover to the computer. 6. Start prying at the front of the computer and work around to the back to separate the bottom cover from computer. Remove the bottom cover. 7. Disconnect the fan cable from the system board. 8. Remove the two Phillips screws that secure the CPU fan to the HP Pavilion x360 13-u063na. 9. Remove the fan from the computer. Reverse this procedure to install the fan.